Prototype and Program ATtiny Chips
Created to make ATtiny chips easier to work with the Chipper Shield – a custom PCB – is on its 3rd generation and encompasses all of the core components to get your next project up and running.
- 100% Arduino compatible
- Program ATtiny 85/45/25/15/13 84/44/24 2313/4313 chips.
- Debug your program through 2 LEDs and broken out sensor port.
- Compatible with either an Arduino board or AVR programmer
- House sensors on the proto area of the board with access to broken out power and ground.
- Reset a chip mid-program through the reset button.
Chipper Board Companion Guides: